FUNAI MSD126 owner manual Display Setting, Audio Setting, Audio menu

B DISPLAY Setting

You can change the display functions. Follow steps 1 to  in the “CUSTOM Menu” section on page 14.

Select the desired item.

ENTER

DISPLAY menu

SETUP	DISPLAY
TV ASPECT		4:3 LETTER BOX
STILL MODE		AUTO
PROGRESSIVE		OFF

TV ASPECT:

•Select “4: LETTER BOX”, so that black bars may appear on the top and bottom of the screen.

•Select “4: PAN & SCAN” for a full height picture with both sides adjusted.

•Select “16:9 WIDE” if a wide-screen TV is connected to this unit.

TV ASPECT: QUICK

(Default: 4:3 LETTER BOX)

See Hint on the left.

TV ASPECT	4:3 LETTER BOX		TV ASPECT
			4:3 LETTER BOX
STILL MODE	AUTO
		ENTER	4:3 PAN & SCAN
PROGRESSIVE	OFF
			16:9 WIDE

STILL MODE: (Default: AUTO) See Hint on the left.

TV ASPECT	4:3 LETTER BOX		STILL MODE
			AUTO
STILL MODE	AUTO		FIELD
PROGRESSIVE	OFF
		ENTER	FRAME

PROGRESSIVE: QUICK

(Default: OFF)

See Hint on the right.

TV ASPECT	4:3 LETTER BOX	4:3 LETTER BOX
STILL MODE	AUTO	AUTO
PROGRESSIVE	OFF	ON

ENTER

Select the

desired ENTER setting.

ENTER

Select the desired

setting. ENTER

ENTER

SETUP

6 To exit

the TV ASPECT or STILL MODE screen

SETUP

To complete the PROGRESSIVE setting

ENTER

STILL MODE:

•Select “AUTO” usually.

•If you select “AUTO”, automati-

cally select the best resolution setting (FRAME or FIELD) based on the data characteristics of the pictures. (default)

•If you select “FIELD”, the picture in the still mode will be stabilized.

•If you select “FRAME”, the picture in the still mode will be highly defined.

•An individual picture on TV screen is called a “frame”, which consists of two separate images called as “field”.

•Some pictures may be blurred if you select “AUTO” in the still mode due to their date characteristics.

If there is no picture or you do not press any buttons for 15 seconds, Progressive scan will switch to “OFF” and it will exit the setup menu.

Before proceeding…			Select “Yes”.
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is			ENTER
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
Activate Progressive?		NO
		YES
SELECT: K / L	SET:ENTER

ENTER

Select “Yes”.

Confirm again to use progressive scan.

If Picture is good, select ‘YES’.

ENTER

NO

YES

SELECT: K / L SET:ENTER

PROGRESSIVE:

•You can set “PROGRESSIVE” to “OFF” in the DISPLAY menu or press and hold [PLAY B] on the front of the unit for more than 5 seconds during playback, so that the P- SCAN indicator on the front panel lights off.

•When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at all.

Functions

C AUDIO Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to

in the “CUSTOM Menu” section on page 14.

Select the desired item.

ENTER

AUDIO menu

SETUP	AUDIO
DRC		ON
DOWN SAMPLING		ON
DOLBY DIGITAL		BITSTREAM

5 DRC (Dynamic Range Control):

(Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

DRC	ON	OFF
DOWN SAMPLING	ON	ON
DOLBY DIGITAL	BITSTREAM ENTER	BITSTREAM

DOWN SAMPLING: (Default: ON)

Set to “ON” when outputting in 48kHz.

Set to “OFF” when outputting the original sound.

DRC	ON		ON
DOWN SAMPLING	ON		OFF
DOLBY DIGITAL	BITSTREAM		BITSTREAM
		ENTER

DOLBY DIGITAL: QUICK

(Default: BITSTREAM)

Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.

•BITSTREAM: outputs a Dolby Digital Signals.

•PCM: converts the Dolby Digital into PCM (2 channel).

DRC	ON	ON
DOWN SAMPLING	ON	ON
DOLBY DIGITAL	BITSTREAM	PCM

ENTER

6 To exit the menu

SETUP

DRC:

•This function is available only on the discs which are recorded in the Dolby Digital format.

DOWN SAMPLING:

•When playing back a 96kHz disc with the copyright protection, or when Virtual Surround is set to “1” or “2”, the sound will be down sampled at 48kHz and output as digital audio even if the “DOWN SAMPLING” is set to “OFF”.

•This function is available only on digital output- ting of a disc recorded in 96khz.

-15- EN