Functions
Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.
Playback
Before: Turn on the TV, amplifier and any other equipment which are connected to this unit. Make sure the TV and audio receiver (commercially available) are set to the correct channel.
STANDBY |
|
|
| POWER | PLAY | |
ON |
|
|
| IR |
|
|
PREV | PLAY | NEXT | STOP | OPEN/CLOSE |
|
|
2 | 1 | 3 4 2 | 2 | Lights up when power is on. |
1Press
2Press [OPEN / CLOSE A] and insert a disc with label facing up.
3Press [PLAY B] to start playback.
4Press [STOP C] to stop playback.
2
1
3
4
| SEARCH | OPEN/CLOSE | |
| DISPLAY | MODE |
|
AUDIO |
|
|
|
| 1 | 2 | 3 |
SUBTITLE |
|
|
|
| 4 | 5 | 6 |
ANGLE |
|
|
|
| 7 | 8 | 9 |
REPEAT | CLEAR |
|
|
|
| 0 | +10 |
PAUSE |
| SKIP |
SLOW
PLAY
REVFWD
STOP
Hint
•A “prohibited icon” may appear at the
•Some DVDs may start playback from title 2 or 3 due to specific programs.
•During the playback of a
TIP:
You can change the
DVD menu
Some discs contain menus which allow you to customize DVD playback. Use [K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
•Press [MENU] to call up the DVD menu.
•Press [TOP MENU] to call up the title menu.
Hint
•Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for more details.
Resume
Press [STOP C] during playback. |
| Resume ON |
Press 'PLAY' to play from here. | ||
Resume message will appear on | To play the beginning, |
the TV screen. | press 'STOP' first and then 'PLAY'. |
| |
Press [PLAY B], playback will |
|
resume from the point at which |
|
playback was stopped. |
|
Hint
•To cancel resume, press [STOP C] one more time in the stop mode.
•The resume information will be kept even when unit is in standby mode.
Paused and
Fast Forward / Reverse Search
Press [FWD g] or [REV h] repeatedly during play- |
|
E1 | |
back to select the required forward or reverse speed. |
|
To continue playback, press [PLAY B]. |
|
To use [PREV H], [NEXT G] on this unit
Pressing and holding [PREV H], [NEXT G] on this unit will also change forward or reverse playback speed.
To continue playback, press [PLAY B].
Hint
•For DVDs, fast forward or reverse search speed is different depending on the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).
•For Audio CDs, approximate speed is 1(x2), 2(x8) and 3(x30).
Slow Forward / Reverse
Press [FWD g] or [REV h] repeatedly in the pause | 1 |
mode to select the required forward or reverse speed. To continue playback, press [PLAY B].
To use [PREV H], [NEXT G] on this unit
Pressing and holding [PREV H], [NEXT G] on this unit in the pause mode will also change forward or reverse playback speed. To continue playback, press [PLAY B].
Hint
•Slow forward or reverse speed is different depending on the disc. Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
•Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the slow playback mode are blurred. (Refer to pages
Zoom
Functions
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
1) Press [ZOOM] repeatedly during playback to select the required zoom factor: x2, x4 or OFF.
The disc goes forward by one frame each time [PAUSE F] | x2 | x4 |
|
| |
is pressed in the pause mode. |
|
|
To continue playback, press [PLAY B]. |
|
|
Hint
•On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the pause mode are blurred. (Refer to pages
To use [PREV H], [NEXT G] on this unit
Press once to skip a chapter or track to a desired point.
- -
2)Use [K / L / s / B] to slide the zoomed picture across the screen.
3)To exit zoom function, press [ZOOM] repeatedly to select OFF.
Hint
•Zooming function does not work while the disc menu is showing up.
•x4 zoom is not available on some discs.
•The picture may be distorted when you press [PAUSE k] or [REV h] repeatedly in the zoom mode.
•In the zoom mode, it automatically changes 
x2(x4) to the zoomed position guide.
EN
