- 22 - EN
9I03
For every day recording : To r ecord a TV program at
the same time on the same channel every day.
(Example: Monday through Sunday)
Press the STOP/L(down) button
until “EVRYDAY” appears.
Then, press the F.FWD/Bbut-
ton.
For weekly recording : To r ecord a TV program at
the same time on the same channel every week.
(Example: every Monday)
Press the STOP/L(down) button
until “EVRY” and your desired
day of the week appear together.
Then, press the F.FWD/Bbut-
ton.
5Set beginning hour
Press the PLAY/Kor STOP/Lbut-
ton until the desired hour appears.
(Example: “ 7, PM” for 7:30PM)
Then, press the F.FWD/Bbutton.
6Set beginning minute
Press the PLAY/Kor STOP/Lbut-
ton until the desired minute appears.
(Example: “30” for 7:30PM)
Then, press the F.FWD/Bbutton.
7Set end hour
Press the PLAY/Kor STOP/Lbut-
ton until the desired hour appears.
(Example: “8, PM” for 8:50PM)
Then, press the F.FWD/Bbutton.
8Set end minute
Press the PLAY/Kor STOP/Lbut-
ton until the desired minute appears.
(Example: “50” for 8:50PM)
Then, press the F.FWD/Bbutton.
9Set the tape speed
Press the PLAY/Kor STOP/Lbut-
ton until the desired tape speed
appears. (Example: SP)
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B61EVRY MON-:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
10 Finish setting the program
Press the F.FWD/Bor REW/sbutton. The program
is now completed.
•To set another program, repeat steps [2] to [10].
•Press the MENU button on the remote control to
return to original mode.
11 Set the timer
Press the POWER button to set automatic timer
recording. The RECORD indicator lights up.
•You must turn off the TV/VCR to activate automat-
ic timer recording.
If power is not turned off and you continue watch-
ing TV, “TIMER REC STANDBY” starts flashing
on the TVscreen 2 minutes before the programmed
start time.
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B61 7/04 FRI 7:12PM-:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B61 7/04 FRI 7:30PM-:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B61 7/04 FRI 7:30PM8:30PM- -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B61 7/04 FRI 7:30PM8:50PM- -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B61 7/04 FRI 7:30PM8:50PMSP
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
To shift the time schedule of an automatic timer
recording.
1)Press the POWER button.
2)Repeat step [1] on page 21.
3)Press the RECORD button and select the desired
program using the PLAY/Kor STOP/Lbutton.
4)Press the RECORD button again.
Each additional push will shift forward the
begin/end time for recording by 10 minutes. When
the recording is already in progress, each additional
push will shift forward the end time only. If you
want to cancel while setting, press the
PAUSE/STILLbutton on the remote control. The
recording time returns to the original time.
NOTE: When you shift forward the time schedule
during recording, the recording speed will automati-
cally be set to the SLPmode.
5)Press the F.FWD/Bor REW/sbutton to exit the
setting menu. Then press the MENU button on the
remote control to return to original mode.
TO CORRECT A PROGRAM
•While setting a program; press the REW/sbut-
ton to go back one step and enter the correct num-
bers using the PLAY/Kor STOP/Lbutton.
•After setting a program;
1)Press the POWER button.
2)Repeat steps [1] - [2] on page 21.
3)Press the F.FWD/Bbutton (or press the REW/s
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the PLAY/Kor STOP/Lbut-
ton.
4)Press the POWER button to set automatic timer
recording.
TIMER PROGRAM EXTENSION– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B61EVRY DAY -:- - -:- -- -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
T5403/7403UD.QX33 02.12.24 11:58 AM Page 22