FUNAI ZV457MG9 owner manual Timer Recording, Press OK when all items are Entered

TIMER RECORDING

Use [K / L / s / B] or [the Number						7
buttons] to enter the start and end
4 time, then press [B].
	Date	Start			End
	JAN/02	12	: 00AM	- - : - -
	CH	REC To			Mode
	DTV125. 1	DVD			SP
					SP 2h00m

•You cannot make a program which recording time exceeds 12 hours.

Use [K / L] to select a recording mode.

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
CH	REC To	Mode
DTV125. 1	DVD		SP
		SP	1h00m

Refer to “Recording Mode” on page 38.

•When recording to DVD, you can check the remaining recordable space of the disc when you select the recording mode.

5Use [K / L / s / B] to select analog (“- - -”) / digital (“DTV”) mode or external input (L1 / L2), then press

[B].

e.g.) external input mode

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
CH	REC To	Mode
L1	DVD		SP
		SP	1h00m

To record from external input (e.g., cable/ satellite box), select L1 or L2.

Use [K / L] or [the Number buttons] to select the channel number to record, then press [B].

For digital mode, select both major and minor channels. Refer to “How to select a channel number for the timer recording” on page 44 for more details.

e.g.) analog mode

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
CH	REC To	Mode
10	DVD		SP
		SP	1h00m

e.g.) digital mode

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
CH	REC To	Mode
DTV125. 1	DVD		SP
		SP	1h00m

6Use [K / L] to select the recording media (“DVD” or “VCR”), then press[B].

e.g.) recording to DVD

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
CH	REC To	Mode
DTV125. 1	DVD		SP
		SP	1h00m

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
CH	REC To	Mode
DTV125. 1	DVD		SP
		SP	1h00m

Auto recording mode select (DVD only)...

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and selects the best recording mode available automatically to complete recording the program.

Date	Start	End
JAN/02	12 : 00AM	1 : 00AM
CH	REC To	Mode
DTV125. 1	DVD	Auto

Auto 1h00m

•“Auto” is only available for one program in the timer program list.

•The recording may be cut short when the available recording space of the disc is too limited.

8 After displaying a warning message for 10 seconds, timer program list will appear.

Press [OK] when all items are

entered.

Press TIMER SET to Timer Standby mode.

When Timer set on DVD or VCR,

it is not available in the standby mode.

Press TIMER SET to cancel the Standby mode.

Timer Programming

JAN/ 2/08 12:00 AM 125.1 SP
SP (1:00)		TUE JAN/01 11:00AM
Date	Start	End	CH
JAN/02	12:00AM	1:00AM	DTV125. 1

Your program setting is now stored.

•To set another program, repeat steps 2 to 8.

•To exit, press [TIMER] or [SETUP].

•When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue.

•To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 44.

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

9Press [TIMER SET] to set a timer programming.

will appear on the front panel display.

EN 43

Español