FUNAI ZV457MG9 owner manual Frequently Asked Questions, Rec, Output Jacks

TROUBLESHOOTING

VCR

Symptom	Remedy
There is no picture.	• If you connect the cable to S-VIDEO OUT/ COMPONENT VIDEO OUT /
	HDMI OUT jack, connect it to AUDIO / VIDEO OUT jack instead.
Picture noise appears.	• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”
	(page 5).
	• Adjust tracking control for better picture by pressing [CHANNEL / ]
	while you are playing back a cassette tape.
The cassette tape does not play back.	• No cassette tape is inserted.
Recording does not start after you press	• Make sure the cassette tape has an erase-protection tab when you
[REC I].	record to a cassette tape. If needed, cover the hole with cellophane
	tape.
The remote control does not function.	• Check if a cassette tape is in this unit.
The motor rotates even when	• The motor may rotate for the duration of approximately 5 minutes for
playback / recording is stopped.	efficient operation. This is not a malfunction.

Frequently Asked Questions

–Can I record to CD-RW/-R?

–Can I play back DVD-video that is bought in another country?

–Can I connect the unit to my PC?

–Can I program a timer recording with cable/satellite box?

–Can I record one channel while watching another channel using a cable / satellite box?

–Can I connect this unit directly to a TV which only has an antenna in jack using an RF coaxial cable?

–Can I change the channels on the cable / satellite box using the remote control of this unit?

No, this unit records only DVD.

Possible when the region code of the disc is 1 and All.

No, you cannot control the unit by PC.

Yes, you can. Select “L1” or “L2” as your recording channel, and leave the cable / satellite box on (pages 17, 42-45).

It depends on your connection configurations. For more details, please kindly contact your cable / satellite provider.

No. You need an RF modulator (commercially available) to connect this unit to a TV which only has an antenna in jack (page 16). This unit does not have an RF modulator.

No. Changing the channels on the cable / satellite box using this unit’s remote control is not possible. You need to use the remote control supplied with the cable / satellite box to change the channels on the cable / satellite box.

Note for Output Jacks on the Rear Panel

1

HDMI OUT

							OUT
	DVD				DVD/VCR
DIGITAL	AUDIO	S-VIDEO	COMPONENT	S-VIDEO	IN ---AUDIO---OUT
AUDIO OUT	OUT		VIDEO OUT
			Y		L	L	IN
							ANTENNA
	L	OUT	PB	IN	R	R
			/CB
COAXIAL					IN ---VIDEO---OUT

			R	PR
				/CR
	2	3	4	5	6
Available for	DVD mode			VCR mode
Output Jacks
1 HDMI OUT	✔
2 COAXIAL DIGITAL AUDIO OUT	✔
3 AUDIO OUT	✔
4 S-VIDEO OUT	✔
5 COMPONENT VIDEO OUT - interlace	✔
5 COMPONENT VIDEO OUT - progressive	✔
6 AUDIO/VIDEO OUT	✔			✔
✔ : Available	: Not available

98 EN