9.Do not attempt to service your Series II unit beyond what is described in this manual. All other servicing should be referred to qualified service personnel.
ADDITIONAL F E AT U R E S
PL-PRO SERIES II
The PL-PRO II features LED rack lights which produce virtually no heat and provide an extremely long life span. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. A rear mounted BNC jack accepts any standard (12VAC 0.5 amp) gooseneck lamp for rear rack illumination.
Additionally, the PL-PRO II offers a 20 segment LED bar-graph meter that displays incoming voltage between 90 and 128 volts in 2-volt steps. The normal range voltages are indicated in green, with moderately and extremely high or low voltages in yellow and red respectively. The voltmeter’s accuracy is ±2 volts. It can easily be re-calibrated, if necessary. (E-
versions 180 – 256 VAC in 4 volt steps)
The PL-PRO II has a master magnetic circuit breaker switch for the front and rear outlets that is protected from accidental disconnection by a hinged cover. The PL-PRO II also features a 10 foot, 12 gauge heavy-duty power cable.
PL-PRO D SERIES II
The PL-PRO D II features LED rack lights which produce virtually no heat and provide an extremely long life span. A dimmer control for the rack lights allows the user to adjust the level of illumination. A rear mounted BNC jack accepts any standard (12VAC 0.5 amp) gooseneck lamp for rear rack illumination.
Additionally, the PL-PRO D II offers a laboratory precision digital meter that displays incoming voltage in 1-volt steps. The voltmeter’s accuracy is ±1.5 volt.
The PL-PRO D II has a master magnetic circuit breaker switch for the front and rear outlets that is protected from accidental disconnection by a hinged cover. The PL-PRO D II also features a 10 foot, 12 gauge heavy-duty power cable.
PM-PRO SERIES II
The PM-PRO II features two laboratory precision digital meters that display both incoming voltage in 1-volt steps, and a true R.M.S. current meter that measures the AC power draw within 0.5 amp. A rear mounted BNC jack accepts any standard (12VAC 0.5 amp) gooseneck lamp for rear rack illumination.
The PM-PRO II has a master magnetic circuit breaker switch for the front and rear outlets that is protected from accidental disconnection by a hinged cover. The PM-PRO II also features a 10 foot, 12 gauge heavy-duty power cable.
4
