4 | PM-PRO POWER CONDITIONER/MONITOR |
cables at plugs, and the point where they exit from the PM-PRO. To prevent risk of fire or injury, damaged cords and cables should be replaced immediately.
7.Clean the PM-PRO with a damp cloth only. Do not use solvents or abrasive cleaners. Never pour any liquid on or into the PM-PRO.
8.When left unused for a long period of time, the power cord of the PM-PRO should be unplugged from the outlet.
9.The PM-PRO should be serviced by qualified service personnel when:
a.The power supply cord or the plug has been frayed, kinked, or cut.
b.Objects have fallen or liquid has spilled into the unit.
c.The PM-PRO has been exposed to rain or other moisture.
d.The PM-PRO does not appear to operate normally or exhibits a marked change in performance.
e.The PM-PRO has been dropped, or the enclosure damaged.
10.The PM-PRO requires that a safety ground be present for proper operation.
Any attempt to operate the PM-PRO without a safety ground is considered im- proper operation and could invalidate the warranty.
11.There are no user-serviceable parts in the PM-PRO. Refer servicing to qualified service personnel only.