3
9. Attach EMI Core (supplied) to antenna c able.
Set the fixing band to the EMI core.
This bend should be
facing toward you.

Fixing band

Figure 9 Fixing band
10. Referring to Figure 8, c onnect the 9-pin
connector of the antenna cable to J 801.
11. Refasten the shield plate w ith 10 screws. Be
sure not to pinch cable from the r otation
detector with the shield plate. See “Caution”
in Figure 5 for details.
12. Fasten the Fixing band w ith Screw
(supplied).

Screw(M4X15)

EMI Core

Fixing

Band

Align bend with

corner of chassis.

Figure 10 How to fix the EMI Core
13. Confirm that the rubber gasket is properly
positioned and then tighten the fi xing screws
for the cover. Refer to Figure 7 for
positioning of rubber gasket.
Mounting using the optionalmounting bracket
A mounting bracket for fastening the an tenna
unit to a mast on a sailboat is opti onally
available (Type OP03-93, Code No.008- 445-
080).
Name Type Code No. Qty
Hex. bolt M4X12 000-804-725 4
Hex. bolt M8X20 000-805-707 8
Mounting
plate 03-018-
9001-0 100-206-740 1
Support
plate (1) 03-018-
9005-0 100-206-780 1
Support
plate (2) 03-018-
9006-0 100-206-790 1
Bracket (1) 03-028-
9101-0 100-206-810 1
Bracket (2) 03-028-
9102-0 100-206-820 1
Fixing plate 03-028-
9103-0 100-206-830 2