Adjustment of picture, Heading alignment

3. ADJUSTMENTS

3.1 Installation Check

After installing the system it is a good idea to check it for proper installation, following the checklist provided below.

•Cable gland is facing toward the stern.

•Four fixing bolts securing the antenna unit are securely tightened.

•The antenna cable is waterproofed at the base of the antenna unit.

•The antenna cable is securely retained against the mast or mounting and is free of interference from running rigging.

•The cable gland on the deck or bulkhead is waterproofed, if provided.

•Connectors of external equipment are securely plugged into the radar display unit.

•The power connections to the battery are of correct polarity.

3.2Exchanging Display Unit of Previous Model

When exchanging the display unit of the MODEL 1621/1621 MARK-2 with that of the MODEL 1622, it is necessary to maintain the magnetron warmup time. This should be done with the radar in stand-by.

1.Press ▲ and ▼ together for about 10 seconds to show the display shown in Figure 19.

	PROGRAM NO				SEL MENU
	03591610XX				BY ▲/▲	KEY

1		MODEL		M1622	M1621/M2

	2	DISPLAY		MAIN	DEMO

		NAV DATA (NMEA 0183)
	GLL		BWR	BWC	GLC	GTD
	RMA		RMG	RMC	VTG	MTW
	DBT		DBS	DPT	GGA

Figure 19 Maintenance menu

2.Select MODEL by ▲.

M1622: 1 minute.

M1621/M2: 1minute and 30 seconds.

3.Select M1621/M2 by 4.

4.Press the [MENU] key to close the menu.

3.3 Adjustments

Do the following in order to adjust the radar.

1) Adjustment of picture

1.Press the [POWER] key on the display unit. The display should light. In approximately one minute, ST-BY appears at the screen center.

2.When ST-BY appears press the [TX] key. The radar will start transmitting, and you will probably see some targets, even though the radar is not yet properly adjusted.

3.Adjust the sensitivity to display a small amount of noise on the screen.

4.Press the [–] key several times to select the minimum range. Adjust the STC to display nearby radar targets clearly on the screen. Too much STC action will eliminate small targets, and too little STC action will cause the screen to be so full of targets and noise that it is hard to determine which target is which as compared to visual sightings.

2) Heading alignment

You have mounted the antenna unit facing straight ahead in the direction of the bow. Therefore, a small but conspicuous target dead ahead visually should appear on the heading mark (zero degrees).

In practice, you will probably observe some small error on the display because of the difficulty in achieving accurate initial positioning of the antenna unit. The following adjustment will compensate for this error, up to ±30 degrees.

1622 specifications

The Furuno 1622 is a state-of-the-art marine radar system designed for small to mid-sized vessels, providing exceptional navigational capabilities and safety features. Renowned for its reliability and advanced technology, the Furuno 1622 stands as an essential tool for both commercial and recreational boaters who demand precision and performance on the water.

One of the standout features of the Furuno 1622 is its high-resolution display, which provides crystal-clear imagery of surrounding waters and targets. The radar system boasts a 162 nautical mile range, allowing operators to detect objects from a considerable distance, which aids in collision avoidance and situational awareness. The user-friendly interface ensures easy access to essential functions, enabling quick adjustments to radar settings depending on varying sea conditions.

The Furuno 1622 utilizes advanced digital signal processing technology, which significantly enhances target detection capabilities while minimizing clutter in the display. This technology allows users to differentiate between land and sea targets, ensuring that boaters can identify navigational hazards with clarity. Additionally, the radar system features a 12 kW magnetron, which provides powerful transmission capabilities for accurate target return.

In terms of installation, the Furuno 1622 is designed to be adaptable, accommodating various mounting options for optimizing performance based on boat size and structure. Its compact design ensures that it can fit seamlessly into different vessel layouts, enhancing its usability without compromising aesthetic appeal.

Safety is a top priority in marine environments, and the Furuno 1622 emphasizes this through features such as the MARPA (Mini Automatic Radar Plotting Aid) system. This technology allows operators to track multiple targets and predict their movements, providing valuable information for decision-making at sea. Furthermore, the radar supports integration with other navigational systems, enhancing overall maritime safety through comprehensive situational awareness.

The radar system's durability and weather-resistant design ensure that it can withstand the harsh marine environment, making it a long-lasting investment for boaters. With its combination of advanced features, robust technology, and user-friendly operation, the Furuno 1622 remains a top choice for mariners seeking reliable radar solutions for safe and efficient navigation.

Overall, the Furuno 1622 encapsulates the ideal balance of performance, reliability, and ease-of-use, making it a critical asset for any vessel navigating the open waters.

Furuno 1622 installation manual Adjustment of picture, Heading alignment

Models: 1622