Make sure the base unit is plugged, Does not work

	PROBLEM	SUGGESTION

	The answering system	• Make sure the base unit is plugged in.
	does not work.	• Make sure that the answering system is turned on.
		• Make sure that the answering system is turned on.

	Messages are	• The incoming messages may be too long.
	incomplete.	Remind callers to leave a brief message.
		• The memory may be full. Delete some or all of the
		saved messages.

	After a power failure,	• Record your greeting again.
	the outgoing message	The prerecorded message remains.
	is deleted.

	No sounds on the base	• Adjust the speaker volume on the base.
	unit speaker during
	call monitoring or
	message playback.

	Cannot access remote	• Make sure you are using the correct PIN code.
	call-in features from	• Make sure that the touch-tone phone you’re using
	another touch-tone	• Make sure that the touch-tone phone you’re using
	another touch-tone	can transmit the tone for at least two seconds. If it
	phone.	can transmit the tone for at least two seconds. If it
	phone.	cannot, you may have to use another phone to access
		cannot, you may have to use another phone to access
		your message.
		• When the base is in use, you cannot access remote
		call-in features.

Page 56

Image 56

Uniden EXS 9995 Make sure the base unit is plugged, Does not work, Saved messages, Record your greeting again, Is deleted

Contents

Page Controls and Functions Contents Features Welcome Included in Your Package Switch to interrupt its power Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mounting Direct wall mounting Installing the Handset Battery Pack Charging the Battery Pack Initial battery chargingCharging optional battery packs Pull the cover of battery charger Low battery indicator Cleaning the Battery ContactsSetting the PULSE/TONE Switch Adjusting the Volume Controls Installing the Beltclip To attach the beltclipTo remove the beltclip Pull both side of the tabs from the holes Headset Installation To reset the digital security codeAutomatic Digital Code Security Wait for 5 seconds Making and Receiving Calls Basic 2-line operation When you finish the call, press line 1 to hang up Answering a Call from the Base Dialing from Talk Mode Making a Call from the HandsetHandset rings and the following Screen appears Pick up the handset Press line Flash and Call Waiting Using the Tone FeatureDialing from Standby Mode To redial from the handset Using RedialPlacing a Call on Hold Handset beeps for 60 seconds Following screen appears Using the Mute FeatureUsing the page Feature Line Operation Extension In Use WAY Conferencing Press call id/hold Press page/int’com on the base Using Your EXS 9995 IntercomFrom the Base to the Handset Transferring a Call From Handset to Base Traveling OUT-OF-RANGE On the handset, Press line 1 to talk Storing a Phone Number in Memory On the Handset When you have finished entering a name, press select Editing a Phone Number in Memory Store Number From the Handset Erasing a Number from MemoryAfter erasing a number, you may add a new address to memory Page Press line 1. The number dials Using Memory DialingStandby Mode Dialing from the Handset Talk Mode Dialing from the Handset Number dials Using Caller ID Setting up Caller ID optionsTo change your Caller ID options Turning AutoTalk and Caller ID/Call Waiting On or Off Programming Your Area Code Screening Your Calls Reviewing Caller ID name/numbers Line Storing a Caller ID number in a memory location Select. The following screen appears Deleting a Caller ID message To delete a single Caller ID message, follow the steps below Deleting all Caller ID name/numbers Press del/conf to delete name/numbers Using Cidcw Caller ID with Call Waiting Press and hold clock until a tone sounds Setting UP Your Answering SystemTurning the answering system on/off Recording your Personal/User Greeting Setting Your GreetingPrerecorded Greeting Choosing between Prerecorded and User Greetings Press greeting to play the current greeting Line 1 and line 2 must use the same PIN code Announce only featureSelecting a PIN Code Setting Ring Rime Switch Ring time switch is common for line 1 and line Using Your Answering System Playing your messages Press skip at any time to skip to the next message Repeating a MessageSkipping a Message Deleting a Message Voice MemoDeleting individual message Deleting all messages Recording a Conversation To stop the recording, press voice memo or play/stop Remote Access Away from Home Remote Rome Monitor Quick Reference Chart Adjust the speaker volume on the base Make sure you are using the correct PIN codeCall-in features from Call-in features Memo Memo At Uniden, we’ll take care of you

Uniden EXS 9995 Make sure the base unit is plugged, Does not work, Saved messages, Is deleted

Models: EXS 9995

PROBLEM

• Make sure the base unit is plugged in.

does not work.

saved messages.

• Record your greeting again.

The prerecorded message remains.

is deleted.

• Adjust the speaker volume on the base.

unit speaker during

call monitoring or

message playback.

• Make sure you are using the correct PIN code.

call-in features from

another touch-tone

phone.

your message.

call-in features.