Uniden EXS 9995 manual Headset Installation, Automatic Digital Code Security, Wait for 5 seconds

Models: EXS 9995

1 60
Download 60 pages 13.29 Kb
Page 15
Image 15

Use only the Uniden HS910 headset specifically designed for Spread Spectrum phones. You may hear a buzz or hum on other headsets.

Keep the headset wire away from handset and base antennas.

HEADSET INSTALLATION

Your phone may be used with an optional headset, the Uniden HS910. To use this feature, simply plug the headset plug into the headset jack. Your phone is ready for hands-free conversation.

If you are using an optional headset, you must still use the handset keypad for phone operations.

AUTOMATIC DIGITAL CODE SECURITY

To prevent other parties from making unauthorized calls on your phone line, a digital code was added to the EXS 9995. Your phone’s handset and base share this code. If the phone experiences a power failure, you must reset the digital security code by placing the handset in the base.

To reset the digital security code

1. Remove the handset from the base, hold down page/int’com and you will hear the beep.

2. Replace the handset on the base while holding page/int’com. The paging stops.

3.Wait for 5 seconds.

The status LED flashes to indicate that the digital security code is reset.

13

Page 15
Image 15
Uniden EXS 9995 manual Headset Installation, Automatic Digital Code Security, To reset the digital security code