Insignia NS-CL19C 19" Combo DVD/LCD TV

Setting up your TV

 

Note

 

 

 

 

 

 

 

Objects between the remote control and the

Installing the remote control batteries

sensor may weaken the remote control’s IR signal.

Range can be diminished by direct sunlight

 

To install the batteries:

shining on the TV’s IR sensor.

 

 

 

 

1Open the battery compartment on the back of

the remote control.

Cautions

 

Do not expose the remote control to liquids, direct

 

sunlight, or shock.

 

The remote control may not work correctly if the

 

TV’s IR sensor is under direct sunlight or strong

 

lighting. In these cases, change the angle of the

 

lighting or the TV screen, or operate the remote

 

control closer to the IR sensor.

Connecting to video sources

Connecting to an antenna or cable/satellite receiver

3

1

2Insert the two AA batteries (provided) into the battery compartment. Make sure that the (+) and (-) symbols on the batteries match the diagram inside the compartment.

Using the remote control

To use the remote control:

Point it directly at the TV, within a 30° angle of the IR sensor on the front of the TV, and within 20 feet.

4

2

To connect an external antenna or cable/ satellite receiver:

1Connect the antenna cable (1) from an antenna (2) or cable/satellite receiver (3) to the antenna input jack (4) on the TV.

2Press the INPUT button to set the TV’s signal input to TV.

Notes

To improve picture quality in a poor signal area, you can purchase and install a signal amplifier.

To split the signal from an antenna, you will need a 2-way signal splitter.

8

www.insignia-products.com

Page 7
Image 7
Insignia NS-CL19C manual Setting up your TV, Installing the remote control batteries, Connecting to video sources