9
Insignia NS-CL19C 19" Combo DVD/LCD TV
www.insignia-products.com
Connecting to a VCR or other AV source
To connect your TV to a VCR or other AV
source:
1Turn off the TV and the VCR (or other
source).
2Connect an RCA video cable to the VCR (1),
then to the VIDEO IN jack on the back of the
TV (2).
- OR -
Connect an S-Video cable to the VCR, then
to the S-VIDEO jack on the back of the TV.
3Connect RCA audio cables to the VCR’s
audio output jacks, then to the AUDIO L and
R jacks on the back of the TV.
4Turn on the TV and the VCR.
5Set the VCR output switch to channel 3 or 4,
then tune your TV to the same channel.
6Press the INPUT button to set the TV’s signal
input to AV or S-VIDEO.
Connecting to a cable box
To connect your TV to a cable box with an RF
cable (1):
1Turn off the TV and the cable box.
2Connect a 75 ohm RF cable from the cable
box to the ANT IN jack on the back of your
TV.
3Set the cable box output switch to channel 3
or 4, then tune your TV to the same channel.
4Turn on the TV and the cable box.
5Change channels at the cable box or with the
cable box remote.
To connect your TV to a cable box with a AV
cables (2):
1Turn off the TV and the cable box.
2Connect RCA video and audio cables from
the cable box to the VIDEO and AUDIO IN
jacks on the back of your TV.
•Yellow - Video
• White - Audio left
• Red - Audio right
3Turn on the TV and the cable box.
4Press the INPUT button to set the TV’s signal
input to AV or S-VIDEO.
5Change channels at the cable box or with the
cable box remote.
1
2
1
2