Uniden EXS 9995 manual Remote Access Away from Home

You can check both line messages by calling either line 1 or line 2.

You must enter a command within 15 seconds of entering command waiting mode or the answering system automatically hangs up and returns to standby.

The system will only playback messages for four minutes and then it returns to command waiting mode. To continue playing your message, press # then 2 again within 15 seconds.

REMOTE ACCESS AWAY FROM HOME

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new greeting message, and to monitor sounds in the room.

1.Call your telephone number. (Either line 1 or line 2)

2.During the answering machine is activated, press # and your PIN code.

3.The answering system announces the time and day stamp and the number of messages stored. Then the message playback automatically begins.

4.You may continue to listen to your message, or you may select a command from the following chart.

Command	Function
# then 1	Repeat
# then 2	Playing your messages
# then 3	Skipping a message
# then 4	Deleting a message
# then 5	Stop message playback
# then 6	Answering system On/Off
# then 7	Record Greeting
# then 8	Review Greeting
# then 9	Line Select
# then 0	Room monitor

5.After all of your messages have played, or the playback time exceeds 4 minutes, you will hear that the intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above.

6.When you finish, hang up to exit the system. The answering system automatically returns to standby.

You can only operate one line at a time. When you press # then 9, “set to message on 1 (or 2)” will be announced and back to step 3.

51