Charging the Battery Pack | Uniden EXS 9995 instruction

Please visit your authorized Uniden dealer to obtain an extra battery pack or contact the Uniden Parts Department at (800) 554-3988. Hours are from 8:30 a.m. to 5:00 p.m. Central Standard Time, Monday through Friday.

CHARGING THE BATTERY PACK

▼Initial battery charging

Before connecting your phone for the first time, charge the rechargeable battery pack for 15-20 hours without interruption.

1. Place the handset on the base.

2. Make sure that status LED lights.

If the LED doesn’t light, be sure the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

▼Charging optional battery packs

The base of your phone is equipped with a compartment for charging an extra battery pack for use in your handset. You can obtain an extra battery pack

from your authorized Uniden dealer.

1. Pull the cover of battery charger.

2.Put the battery pack in the compartment with contacts facing down.

3. Replace the charge cover.

4.Charge the battery for 24 hours. When charging is complete, and spare battery is needed, lift the latch to remove the battery pack. To install the charged battery into the handset, see Installing the Handset Battery Pack, page 8.

In the event of a power failure, your spare battery pack temporarily provides power for the base so you can still use your phone. status LED blinks red when the base is powered by the spare battery.

9

Image 11

Uniden EXS 9995 manual Charging the Battery Pack, Initial battery charging, Charging optional battery packs

Contents

Page Controls and Functions Contents Welcome Features Included in Your Package Selecting a Location Switch to interrupt its power DESK/TABLETOP Installation Standard wall plate mounting Wall Installation Direct wall mounting Installing the Handset Battery Pack Pull the cover of battery charger Charging the Battery PackInitial battery charging Charging optional battery packs Low battery indicator Cleaning the Battery ContactsSetting the PULSE/TONE Switch Adjusting the Volume Controls Pull both side of the tabs from the holes Installing the BeltclipTo attach the beltclip To remove the beltclip Wait for 5 seconds Headset InstallationTo reset the digital security code Automatic Digital Code Security Basic 2-line operation Making and Receiving Calls Answering a Call from the Base When you finish the call, press line 1 to hang up Pick up the handset Press line Dialing from Talk ModeMaking a Call from the Handset Handset rings and the following Screen appears Flash and Call Waiting Using the Tone FeatureDialing from Standby Mode To redial from the handset Using RedialPlacing a Call on Hold Handset beeps for 60 seconds Following screen appears Using the Mute FeatureUsing the page Feature Extension In Use Line Operation WAY Conferencing Press call id/hold Press page/int’com on the base Using Your EXS 9995 IntercomFrom the Base to the Handset From Handset to Base Transferring a Call On the handset, Press line 1 to talk Traveling OUT-OF-RANGE On the Handset Storing a Phone Number in Memory When you have finished entering a name, press select Editing a Phone Number in Memory Store Number From the Handset Erasing a Number from MemoryAfter erasing a number, you may add a new address to memory Page Press line 1. The number dials Using Memory DialingStandby Mode Dialing from the Handset Number dials Talk Mode Dialing from the Handset Turning AutoTalk and Caller ID/Call Waiting On or Off Using Caller IDSetting up Caller ID options To change your Caller ID options Screening Your Calls Programming Your Area Code Reviewing Caller ID name/numbers Line Select. The following screen appears Storing a Caller ID number in a memory location To delete a single Caller ID message, follow the steps below Deleting a Caller ID message Press del/conf to delete name/numbers Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Press and hold clock until a tone sounds Setting UP Your Answering SystemTurning the answering system on/off Recording your Personal/User Greeting Setting Your GreetingPrerecorded Greeting Press greeting to play the current greeting Choosing between Prerecorded and User Greetings Line 1 and line 2 must use the same PIN code Announce only featureSelecting a PIN Code Ring time switch is common for line 1 and line Setting Ring Rime Switch Playing your messages Using Your Answering System Press skip at any time to skip to the next message Repeating a MessageSkipping a Message Deleting all messages Deleting a MessageVoice Memo Deleting individual message To stop the recording, press voice memo or play/stop Recording a Conversation Remote Access Away from Home Remote Rome Monitor Quick Reference Chart Call-in features Adjust the speaker volume on the baseMake sure you are using the correct PIN code Call-in features from Memo Memo At Uniden, we’ll take care of you