Before you plug the other end of the telephone cord into the modular jack on the wall, charge the battery (See Charging the Battery Pack, page 9).
Be careful not to insert the mounting screws into possible electrical hazards such as cables, wiring,
or pipes.
7. On the base unit, pull the handset retainer out of the slot. Rotate it clockwise 180 degrees.
8. Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the ▼ is down. The retainer holds the handset in place.
▼Direct wall mounting
If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:
•Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting the screws into the wall.
•Mount your phone near a working phone jack to avoid excessive cord lengths.
•Make sure the wall material is capable of supporting the weight of the base and the handset.
1.Insert two #10 mounting screws (with
device) into the wall
2. Refer to steps 1 through 8 on page 6 and 7 to mount the telephone.
7
