Furuno 1833C, 1933C, 1943C manual Plotter function keys, Rul

5. CUSTOMIZING YOUR UNIT

4.Select function desired with the trackball, then press the ENTER soft key or [ENTER] knob to register your selection.

5.Press the [MENU] key to close the menu.

Plotter function keys

Menu Item	Function	Function Key
		Label
OFF	Assigns no function.	—
ADD: ADD NEW WPT	Registers waypoint at cursor position. Place cursor	ADD
	for waypoint location, then press function key.
MWP: MOVE WPT	Moves selected waypoint to different position.	MWP
	Select waypoint, press function key, select new
	position, then press the [ENTER] knob.
RUL: RULER	Measures range and bearing between two points.	RUL
	Press START POINT soft key to change starting
	point if necessary. Range and bearing between two
	points appears at the top of the screen.
GWP: GOTO WPT	Specify waypoint to set as destination. Enter	GWP
	waypoint name in window, then press the ENTER
	soft key.
GRT: GOTO ROUTE	Specify route to follow. Enter route name in window,	GRT
	then press the ENTER soft key.
EML: EDIT MK/LINE	Displays mark & line menu. Press appropriate soft	EML
	key to access menu item.
TRK: TRACK ON/OFF	Each press starts or stops recording/plotting own	TRK
	ship’s track.
TTM: TTM ON/OFF	Turns TTM (target track) display on/off.	TTM
DTT: DEL TGT TRACK	Erases all TTM track.	DTT
ALP: ALPHA LIST	Displays waypoint alphanumeric list.	ALP
LCL: LOCAL LIST	Displays waypoint local list.	LCL
RTE: ROUTE LIST	Displays route list.	RTE
DBX: D. BOX ON/OFF	Shows/hides data boxes.	DBX
CHG: CHANGE CNTRL	Changes control in combination screen.	CHG

Note: To use CHANGE CNTRL set it on all displays, with the same soft key number.

5-11