![](/images/new-backgrounds/1118271/11827149x1.webp)
HOST NAME Control
Sets host name.
FURUNO | HOST NAME | TX/STBY POWER | |
NETWORK SOUNDER | 4 | 5 | I ON |
3 | 6 | ||
| 2 | 7 | POWER switch |
| 1 0 | 9 8 | O OFF Turns power |
|
| DEFAULT | On and off. |
|
|
|
LED lamp
The lamp flashes when the NavNet display unit is powered and communicating with the network sounder.
7.Turn on the
8.Confirm that the LED lamp flashes.
2.2.2 Sounder source setting
1.Press the [POWER/BRILL] key on the NavNet series unit while pressing and holding down the [MENU] key. Release the [POWER/BRILL] key when you hear a beep.
2.Release the [MENU] key when the message “STARTING INSTALLATION MODE” appears.
3.After the radar screen appears, press the [MENU] key.
4.Press the SYSTEM CONFIGURATION soft key.
5.Press the INSTALLATION SETUP soft key.
RADAR
MENU
RADAR DISPLAY SETUP
RADAR RANGE SETUP
ARP SETUP
SYSTEM
CONFIG
GENERAL SETUP
NAV OPTION
SYSTEM SETUP
INSTALL
SETUP
NETWORK SETUP
RADAR SETUP
NETWORK SOUNDER SETUP
FUNCTION KEY SETUP
INSTALLATION SETUP
NETWORK SETUP FOR AUX#
SYSTEM CONFIGURATION
RETURN
RETURN
Radar menu | System configuration menu | Install setup menu |
# =Shown on Model 1833C only
How to access the installation setup menu (example: radar NavNet unit)
7