SAFETY INSTRUCTIONS
Read these safety instructions before you operate the equipment.
| WARNING | Indicates a condition that can cause death or serious injury if |
| |
| not avoided. |
|
| |
|
|
|
| |
|
|
|
| |
| CAUTION | Indicates a condition that can cause minor or moderate injury if |
| |
| not avoided. |
|
| |
|
|
|
|
|
| Warning, Caution | Prohibitive Action | Mandatory Action |
|
|
|
|
|
|
WARNING
Do not open the equipment unless totally familiar with electrical circuits and service manual.
Only qualified personnel should work inside the equipment.
Do not approach the radome closer than 1.4 m (FELCOM 500) or 0.7 m (FELCOM 250) when it is transmitting.
The radome emits radio waves which can be harmful to the human body, particularly the eyes.
RF power dendity | FELCOM500 | FELCOM250 |
on antenna aperture | distance | distance |
100W/m 2 | - | - |
|
|
|
25W/m 2 | 0.5 m | 0.4 m |
|
|
|
10W/m2 | 1.4 m | 0.7 m |
|
|
|
Turn off the power at the mains switchboard before beginning the installation. Post a sign near the switch to indicate it should not be turned on while the equipment is being installed.
Fire, electrical shock or serious injury can result if thepower is left on or is applied while the eqiuipment is being installed.
WARNING
Ground the equipment to prevent electrical shock and mutual interference.
Confirm that the power supply voltage is compatible with the voltage rating of the equipment.
Connection to the wrong power supply can cause fire or damage the equipment.
Keep the following compass safe distances to prevent interference to a magnetic compass.
Unit | Standard | Steering | |
compass | compass | ||
| |||
FELCOM 500 | 0.75m | 0.40 m | |
Antenna Unit | |||
|
| ||
FELCOM 250 | 0.70m | 0.40 m | |
Antenna Unit | |||
|
| ||
Communication Unit | 0.40 m | 0.30 m | |
|
|
| |
IP Handset | 0.70 m | 0.45 m | |
Facsimile | 1.30 m | 0.80 m | |
|
|
| |
Telephone | 0.50 m | 0.40 m | |
Incoming Indicator | 0.45 m | 0.30 m | |
|
|
| |
0.90 m | 0.60 m | ||
|
|
|
i
