5.3 Clearing the Memory
You may want to clear the memory to start afresh with default settings. You can do this as follows:
1.Press the [MENU] key to show the main menu.
2.Press the [►] keys to open the SYSTEM menu.
3.Select DEFAULT RESET by arrow keys.
4.Press the [►] key to select YES.
RGB1 | RGB2 DVI | VIDEO1 | VIDEO2 VIDEO3 OSD SYSTEM |
INFRARED REMOTE | A | A | |
DEFAULT RESET | YES |
| |
| All custom settings will be lost. | ||
| ←key: cancel | →key: reset | |
INFORMATION | fH: 80KHz | fV: 75Hz | |
RGB1 | : 1280x1024 | ||
RGB2 | : 640x480 | fH: 31KHz | fV: 60Hz |
DVI | : NO SIGNAL |
|
|
VIDEO1: NTSC |
|
| |
VIDEO2: PAL |
|
| |
VIDEO3: NO SIGNAL
PROGRAM NO. *****
SYSTEM menu
5.Press the [►] key again to select “reset”.
6.Press the [MENU] key to close the menu.
20
