Fusion MS-AV700, MS-IP700 manual Volume limit, Sub-woofer level, Name, You can access the screen

Volume limit

This feature is useful to limit the volume level to prevent excessive noise levels in specific Zones.

To specify the volume limit for the selected Zone:

a.Select the Volume Limit menu item.

b.Turn the Encoder to adjust the volume limit for the selected Zone.

c.Press any key to exit

Sub-woofer level

External amplifiers are required to add up to 4 subwoofers to the system A single screen is used to set the sub-woofer level for all Zones.

You can access the screen:

•directly from any input source screen by pressing and holding down the Encoder, or

•from a selected Zone’s Sub level menu item, as described below.

To specify the sub-woofer level for the selected Zone:

a.Select the Sub level menu item. The Sub level screen is displayed with the first Zone highlighted.

b.Turn the Encoder to adjust the sub level for the highlighted Zone.

c.If required, press the Encoder to accept the sub level and move automatically to the next Zone.

d.Press any key to exit

Name

Initially, the Zones are named Zone 1–4, but you can give each zone a name

of your choice (up to 10 characters in length). The available characters include all the uppercase letters, all the lowercase letters, space and numbers. While changing the Zone name, you can:

•Exit without saving any changes: press the Menu key.

•Exit and save any changes: press and hold down the Encoder.

42