quantity of oil must not be excessive in order to avoid that oil runs out when the
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamp".
Replacing the fuse
If the
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply: | 230 V AC, 50 Hz |
Power consumption: | 500 W |
6 | |
via | |
10 Hz | |
Number of colours: | 7 dichroic + white |
Number of gobos: | 7 rotating gobos and open |
Dimensions (LxWxH): | 525 x 300 x 150 mm |
Weight: | 15 kg |
Maximum ambient temperature ta: | 45° C |
Maximum housing temperature tB (steady state): | 60° C |
Min.distance from flammable surfaces: | 0.5 m |
Min.distance to lighted object: | 0.5 m |
Fuse: | F 5 A, 250 V |
Fitting lamps: |
|
OMNILUX OSD 90V/250W | No. 89106005 |
OSRAM HSD250 90V/250W | No. 89106010 |
SYLVANIA BA250/2 SE D 90V/250W | No. 89106120 |
PHILIPS MSD250 90V/250W | No. 89106015 |
OSRAM HSD250/2 90V/250W GY9,5 3000h 7800K | No. 89106110 |
PHILIPS MSD250/2 90V/250W | No. 89106115 |
Recommended controllers: |
|
FUTURELIGHT | No. 51834285 |
FUTURELIGHT | No. 51834286 |
No. 51860101 | |
No. 51860110 |
Please note: Every information is subject to change without prior notice. 21.03.2003 ©
15/1551839250X62NXS_V_1_1_E.DOC