G | | SPEED™Q | Maintenance for Your Drive |
|
5.If G-SPEED Q was setup in RAID 5 mode, the unit will begin rebuilding data on the drive. During this process, all drive LEDs will indicate data access. The rebuild time is approximately 2 hours per TB.
6.Once the rebuild is complete, G-SPEED Q is back to normal and protecting your valu- able data once again.
Helpful tips
You can continue using G-SPEED Q even while the drive volume is being rebuilt. How- ever, it willl run at a slower data rate.
It is good practice to keep at least one spare drive module on hand in case of a disk failure. This way, you can rebuild your array in hours rather than wait days for a new one to ship.
