Gardena 1500/1 Art. 1498 Operating, the container. The length of the telescopic pipe

Setting up the telescopic pipe on the container:

1.	Screw telescopic pipe	on the pump.
2.	Release clamping sleeve	of the telescopic pipe.
3.	Adjust telescopic pipe stalk		to the height of
	the container. The length of the telescopic pipe
	can be adjusted between 39 – 62 cm.
4.	Tighten clamping sleeve	by hand.
The length of the telescopic pipe			should be set

in such a way that the pump does not touch the bottom of the container. This prevents dirt in the container reaching the pump.

A rope must be run through the handle of the pump for deeper water containers (max. 1.5 m).

GB

Complete Solution:

(a)the GARDENA Rain Water Collection Filter (Art. No. 3820 / 3821)

(b)the GARDENA Connecting Set (Art. No. 3815),

(c)the GARDENA Rain Water Tank (Art. No. 3801 / 3805)

(d)the matching GARDENA Cover for Rain Water Tank (Art. No. 3800 / 3804), and

(e)the GARDENA Battery Pump (Art. No. 1498).

Use in shallow vessels:

Art. No. 3820/21

Art. No. 3815

Art. No. 3801/3805

Art. No. 3800/3804

Art. No. 1498

If the battery pump is used in flat containers, e.g. to empty a paddling pool, the telescopic pipe can be removed and replaced by the threaded tap connector supplied. The 13 mm (1/2”),

16 mm (5/8”) or 19 mm (3/4”) hose connection must be set up using Original GARDENA System hose connections.

4. Operating

Charging the battery:The battery may only be charged using the NL-12 charger supplied or the solar panel, Art. 7851-00.620.00 with charging cable Art. 1498-20.600.22, obtainable from GARDENA Service.

Operating the pump is not possible during charging !

The battery is partially charged in the works for safety reasons. The battery must be charged before it is used for the first time. As this NiCd-battery is subject to self-discharging, the battery must be charged up to reach a full charge if it has been stored for a relatively long time.

11