GB
e)The electric cord must be uncoiled. Coiled cord can overheat and reduce the
efficiency of the product. Always wind cord carefully, avoiding kinks.
f)Only use the charger provided with your unit when charging the battery.
Use of any other charger could permanently damage the battery, charger and/or the blower unit.
g)If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply with a tripping current of not more than 30 mA. Even with a RCD installed, 100 % safety cannot be guaranteed and safe working practices must be followed at all times. Check your RCD every time you use your product.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating
power tools may result in serious personal injury.
b)Use personal protective equipment. Always wear eye protection and hearing
protection . To prevent dust irritation, the use of a dust mask is recommended. Protective equipment such as eye protection, hearing protection, dust mask, nonskid safety shoes, or hard hat used for appropriate
conditions will reduce personal injuries.
c)Prevent unintentional starting.
Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d)Do not overreach. Keep proper footing and balance at all times. On slopes, be extra careful and wear
product . Walk, never run. Do not use ladders while operating the product.
This enables better control of the power tool in unexpected situations.
16
e)Dress properly. Always wear suitable
clothing, gloves, and stout shoes.
Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
4) Power tool use and care
a)Only use the product in the manner and for the functions described in these instructions. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b)Always make sure your product is in a safe operating condition before use. Do not use the power tool if the switch does not turn it on and off. Know how to stop the product quickly in an emergency. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
c)The impeller continues to rotate after
your product has been switched off.
The motor must be stopped and the impeller blade no longer turning to avoid serious injury from the rotating blades.
d) Remove battery from unit:
–before leaving the product unattended for any period;
–before clearing a blockage;
–before checking, cleaning or working on the appliance;
–if the product starts to vibrate abnormally. Check immediately. Excessive vibration can cause injury.
–before passing to another person.
e)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
f)Maintain power tools. Check for misalign- ment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Keep all cooling air inlets clear of debris.
Many accidents are caused by poorly maintained power tools.
g)Use the power tool and accessories in accordance with these instructions, taking into account the working conditions and the work to be performed. Use the product only in daylight or good artificial light. Use of the power tool for operations different from those intended could result in a hazardous situation.
5) Battery tool use and care
a)Recharge only with the charger provided with your unit and specified by the manufac- turer.
A charger that is suitable for one type of battery may create a risk of fire when used with another battery.
b)Use power tools only with specifically designated batteries.
Use of any other batteries may create a risk of injury and fire.
c)When battery is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
d)Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) Maintenance and storage
Have your power tool serviced by a qualified repair person using only identical replace- ment parts. This will ensure that the safety of the power tool is maintained.
–Keep all nuts, bolts and screws tight to be sure the product is in a safe working condition.
–Replace worn or damaged parts for safety.
–Use only genuine replacement parts and accessories.
–Store in a cool dry place and out of reach of children. Do not store outdoors. The unit must not be stored over 35 °C or under direct exposure to sunlight. Do not store the unit in places with static electricity.
Blower safety warnings
•Inspect the area before using the unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can ricochet, be thrown, or otherwise cause injury or
damage during operation.
•Never run the unit without the proper
equipment attached.
When used as a blower, always install a blower tube. Use only recommended
attachmentsto prevent personal injury.
•Do not use blower near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc. Proper use of the blower will help avoid
spreading fire.
•Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc.
The force of air can cause rocks, dirt, or sticks
to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage.
•Never use for spreading chemicals,
fertilizers, or any other substances. This will prevent the spreading of toxic
materials .
Battery safety
FIRE RISK!
vNever charge the batteries near acids or easily inflammable materials.
RISK OF EXPLOSION!
vProtect blower unit from heat and fire. Do not leave on radiators or expose to strong sunshine for long periods.
Do not use the battery charger outdoors.
vProtect the battery charger from damp or wet areas.
Only use your unit in an ambient temperature between
The charging cable should be checked regularly for signs of damage or ageing (brittleness) and may only be used if it is in perfect condition. The charger provided may only be used to
charge the rechargeable batteries supplied with this unit.
The unit must not be operated during charging. After charging, disconnect the charger from the mains.
Only charge battery between 10 °C – 45 °C. After heavy duty service allow battery to cool down first.
17
GB
