Gardena Art.1482 operating instructions EU Certificate of Conformity

G

		line and fill antiliming agent or a
		mixture of water and vinegar into
		the pump using the delivery outlet
		6. Afterwards rinse thoroughly.
Pump constantly cuts in	Leak on the pressure side.	Check the pressure line and
and out without drawing		connected consumers for leaks.
water.		The non-return valve shall be at
		position 1 when localising faults.
		Note: Even the smallest leak
		(loss of a few mls) can cause the
		pressure in the pump to drop.
		The cause of this is often small
		leaks at taps and toilet flushing
		cisterns.
	There being deposits of dirt in	Loosen the Electronic Mano-
	in Electronic Manometric Switch.	metric Switch from the pump.
		Turn the non-return valve C to
		position 2.
		Clean the non-return valve, e.g.
		by flushing in the direction of flow.
Pump does not cut out.	Rotary switch / non-return	Set the rotary switch to posi-
	valve is set to position 2.	tion 1.
	Non-return valve of the Electronic	Clean the non-return valve, e.g.
	Manometric Switch is blocked.	by flushing in the direction of flow.
	Larger leaks on the pressure side.	Rectify leaks.
Pump doesn’t start	Outlet end (e.g. water accessory)	Open the outlet end.
working.	is closed. There is sufficient water
	pressure in the pressure line.

G

EU Certificate of Conformity

The undersigned

GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 · D - 89079 Ulm

hereby certifies that, when leaving our factory, the units indicated below are in accordance with the harmonised EU guidelines, EU standards of safety and product specific standards.

This certificate becomes void if the units are modified without our approval.

Description of the units:	Directive 93/68/EC		Year of CE marking:
Pressure Tank Unit	Directive 2000/14/EC		1996
Types:	Harmonised
4000/4 electronic plus	European standards:		Ulm, 21.02.2002
4000/5 electronic plus	EN 292 -1
Art. nos.:	EN 292 - 2
	EN 60335 -1
1482 / 1484
	EN 60335 - 2 - 41		Thomas Heinl
EU directives:
	Noise level:		Technical Dept. Manager
Machinery Directive 98/37/EC
		measured / guaranteed
Electromagnetic Compatibility
	1482	77 / 78 dB (A)
89/336/EC
	1484	79 / 80 dB (A)
Low Voltage Directive 73/23/EC

If you have any problems with your Pressure Tank Unit, please contact our Service or return the defective unit together with a short description of the problem – in case of guarantee, with a copy of the receipt – postage paid to one of the GARDENA Service Centres listed on the back of this leaflet.

Note : The pump can also be operated without the Electronic Manometric Switch 5 by plug- ging the mains plug for the pump F into the mains socket. If the fault is caused by the Electronic Manometric Switch, then it is sufficient to forward this to the appropriate servicing office.

We expressly point out that,

in accordance with the product liability law, we are not liable for any damage caused by our units if it is due to improper repair or if parts exchanged are not original GARDENA parts or parts approved by us, and if the repairs were not carried out by a GARDENA Service Centre or an authorised electrician. The same applies to spare parts and accessories.

20 21