GB
e)The electric cord must be uncoiled. Coiled cord can overheat and reduce the
efficiency of the product. Always wind cord carefully, avoiding kinks.
f)When operating a power tool outdoors, use an extension cord suitable for outdoor use fitted with a coupler according to IEC
outdoor use reduces the risk of electric shock.
g)If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply with a tripping current of not more than 30 mA. Even with a RCD installed,
100% safety cannot be guaranteed and safe working practices must be followed at all times. Check your RCD every time you use your product. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious
personal injury.
b)Use personal protective equipment. Always wear eye protection and hearing
protection . To prevent dust irritation, the use of a dust mask is recommended. Protective equipment such as eye protection, hearing protection, dust mask, nonskid safety shoes, or hard hat used for appropriate
conditions will reduce personal injuries.
c)Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d)Do not overreach. Keep proper footing and balance at all times. On slopes, be extra careful and wear
product . Walk, never run. Do not use ladders while operating the product.
This enables better control of the power tool in unexpected situations.
e)Dress properly. Always wear suitable
clothing, gloves, and stout shoes.
Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
18
4) Power tool use and care
a)Only use the product in the manner and for the functions described in these instructions. Always direct the cord to the rear, away from the product. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do
the job better and safer at the rate for which it was designed.
b)Always make sure your product is in a safe operating condition before use. Do not use the power tool if the switch does not turn it on and off. Know how to stop the product quickly in an emergency. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
c)The impeller continues to rotate after
your product has been switched off.
The motor must be stopped and the impeller blade no longer turning to avoid serious injury from the rotating blades.
d)Disconnect the plug from the power source:
– before removing or replacing fully assembled debris bag;
– before leaving the product unattended for any period;
– before clearing a blockage;
– before checking, cleaning or working on the appliance;
– if the product starts to vibrate abnormally. Check immediately. Excessive vibration can cause injury.
– before passing to another person.
e)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
f)Maintain power tools. Check for misalign- ment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Keep all cooling air inlets clear of debris. Many accidents are caused by poorly maintained power tools.
g)Use the power tool and accessories in accordance with these instructions, taking into account the working conditions and the work to be performed. Use the product only in daylight or good artificial light.
Use of the power tool for operations different from those intended could result in a hazardous situation.
5) Maintenance and storage
Have your power tool serviced by a qualified repair person using only identical replace- ment parts. This will ensure that the safety
of the power tool is maintained.
–Keep all nuts, bolts and screws tight to be sure the product is in a safe working condition.
–Replace worn or damaged parts for safety.
–Use only genuine replacement parts and accessories.
–Inspect the debris bag regularly. If the debris bag becomes worn or damaged, replace.
–Store in a cool dry place and out of reach of children. Do not store outdoors.
Blower safety warnings
•Inspect the area before using the unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can ricochet, be thrown, or otherwise cause injury or
damage during operation.
•Never run the unit without the proper
equipment attached.
When used as a blower, always install a blower tube. Use only recommended
attachmentsto prevent personal injury.
•Do not use blower near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc. Proper use of the blower will help avoid
spreading fire.
•Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks,
dirt, or sticks to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage.
•Never use for spreading chemicals,
fertilizers, or any other substances. This will prevent the spreading of toxic materials.
Vacuum safety warnings
•Stop the motor and disconnect the
extension cord before opening the air inlet door or attempting to insert or remove the vacuum tubes.
The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.
•Inspect the area before using the unit. Hard objects can be thrown through the
collection bag or the housing and become
dangerous missiles which can cause serious injury to the operator or others.
•Do not vacuum stones, gravel, metal,
broken glass, etc. Proper use of the unit will reduce possible personal injury and/or damage to the unit.
•Do not attempt to vacuum water or other liquids. Water or other liquids entering
a power tool will increase the risk of electric shock.
•Never run the unit without the proper
equipment attached. When used as
a vacuum, always install vacuum tubes and collection bag assembly. Make sure the
collection bag assembly is completely zipped when unit is running to avoid flying debris. Use only recommended attachments.
•Do not vacuum discarded matches, cigars, cigarettes, or ash from fireplaces, barbecue pits, brush piles, etc. Avoid situations which could set the collection bag on fire. To avoid spreading fire, do not use blower near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc.
•Always use the shoulder strap when
vacuuming . This will help maintain control of the power tool.
•Check air intake openings, elbow tube, and vacuum tubes frequently, always with the unit stopped and the power source
disconnected. Keep vents and tubes free of debris which can accumulate and restrict
proper air flow. Do not use with any opening blocked. Keep free of dust, lint, hair and anything that may reduce air flow.
19
GB
