Gardena WP 700 S, WP 1500 S manual Water jets for, 26,5 mm G 3/4 thread, Pond aeration, Information

G

Applications:

Examples – System Extensions – Product Recommendations

G

Operation

Water jets for		➔ Example for application:
26,5 mm (G 3/4) thread		Water jets may be integrated into water features.
connections
Model		Cascade	Water	Foaming	Water	Water-	Cascade
	Art.		Bell	Jet Spray	Fleur-de-Lis	fall	Rotating
		7814*	7816	7818	7820	7822	7823
	No.
WP 700 S	7851	⋅	⋅	–	–	⋅	⋅
WP 1500 S	7857	⋅	⋅	⋅	–	⋅	⋅

Installing the pump

Caution: Submersion depth

Assembling the solar panel

1.Remove the pump from the filter basket and screw the regulator supplied onto the second opening of the pump up to the limit stop (➔ max. delivery capacity on the vertical outlet). Then replace the pump in the filter basket.

2.Put the pump on a stable base to ensure that the upper edge of the filter tank is completely immersed in water.

Please note the maximum submersion depth (see “Technical Data”).

Insert both aluminium poles 1 into the holes in the side sections

* contained in delivery volume

4

2. Place one of the O-rings 3 on each of the swivel pins 4 of the solar panel 5 then screw both side sections to the solar panel.

Pond aeration

➔Example for application:

To aerate the pond.

➔Product:

GARDENA Pond Aerator Art. No. 7936

3

4

3

Important: when tightening the screws, ensure that you do not screw them too tight to ensure that the solar panel can still be easily adjusted.

Filling the filter tank with zeolith

Zeolith fulfils the following functions:

.Filters the water (➔ protection for the pump).

2

1

Information

.Bonds with excessive nutrients and causes their decomposition by bacteria (➔ Ion exchange and the bonding of e.g. nitrate).

.Helps to keep the pond clean and maintain the biological balance.

.Provides stability for the pump

GARDENA Zeolith, 1 l	Art. No. 7914
GARDENA Zeolith, 5 l	Art. No. 7915

Note:

To ensure the zeolith functions correctly, we recommend you replace or clean it every 6 months (e.g. in salt water).

.Always unplug the pump first before working on it.

.Before assembling system extensions first unscrew the pre- assembled cascade and if necessary also the telescopic tube of the pump and then screw one of the water jets on again (➔ the ball-and-socket joint ensures that the water jet is ver- tical.)

.Follow the Safety and Assembly Information attached to the operating instructions.

Positioning the solar panel

Permanent installation of the solar panel

Starting the pump

Position the solar panel in such a way that it will be exposed to direct sunlight. No shadow should be cast on it.

The ideal positioning angle is 30° from the vertical.

A The solar panel must not be positioned near easily flammable substances.

After adjusting tighten the screws firmly.

.The solar panel can be permanently installed in an outdoor area. For this purpose you should attach the appliance to a wall, e.g. with wooden bolts.

.For permanent installation of the appliance you should ensure that it is exposed to maximum solar radiation.

.The special glazing of the solar panel ensures complete protec- tion against hailstones and other adverse weather conditions.

Connect the power cable of the pump to the socket of the solar panel.

The pump will start as soon as enough energy has been generated from solar radiation in the solar panel.

12 13