Gardena WT1030 operating instructions Operation, Time LED flashes Run Time LED flashes

GG

Installing the anti-theft protection (optional):

8

7

5. Operation

To protect your Water Timer against theft, the GARDENA Anti-	Setting the time of day:
Theft Protection Art. No. 1815-00.791.00 is available from the	2. Set the time on the inner light-grey scale by turning the con-
GARDENA Service.	trol knob and confirm the time you have selected by pressing
1. Fasten the bracket 7 to the back of the Water Timer using	the OK button (e.g.: 10:00 am).
the screw 8.
2. The bracket can be used to attach a chain, for example.	The Start Time LED flashes.
2.
The screw cannot be loosened once it has been screwed in.
	Setting the watering starting time:
	3. Set the watering starting time on the inner light-grey scale by
	turning the control knob and confirm the time you have selected
	by pressing the OK button (e.g.: 20:00).

Setting the watering program: The Water Timer control unit 2 can be removed. This allows 3. The Frequency LED flashes.

you to set the watering program somewhere other than where the Water Timer is to be used.

The time of day and watering starting time are entered to the nearest hour.

1.Turn the control knob to OFF and confirm by pressing the

OK button.

The program stored in the memory is overwritten.

Setting the Watering Cycle:

4.Set the watering cycle on the outer grey scale (Frequency Hours / Days) using the control knob and confirm your selection by pressing the OK button (e.g.: 12 hour cycle).

1.	The Time LED flashes.	4.	The Run Time LED flashes.
8			9