Gardena WT1030 Battery, Putting your Water Timer, Into operation, Water flow, Control knob

G

Battery:	For functional safety reasons, only use a 9 V alkali-manga-
	nese (alkaline) battery type IEC 6LR61.
	The Water Timer will only run for approx. 1 year if the new
	alkaline battery has a nominal voltage of at least 9 V.
	v Check the battery before you buy it.
Putting your Water Timer	To prevent water entering the battery compartment, the Water
into operation:	Timer must only be mounted in a perpendicular position with
	the sleeve nut pointing upwards.
	After you have selected the watering program, the Water Timer
	opens at the selected starting time. To avoid getting wet when
	operating the Water Timer, connect the hose or turn off the tap
	before selecting the program. Alternatively, the control unit can
	be removed for programming.
Water flow:	The max. temperature for the water is 40 °C.
	v Only use clear fresh water.

4

3. Function		G
Control knob and OK button:		The GARDENA Water Timer electronic allows you to set different
!	∀	watering cycles for different watering times independent of whether
		you are using a sprinkler, a sprinkler system installation or drip-
		head watering system to irrigate your garden.
		Your Water Timer electronic will water your garden completely
		automatically according to the program you choose. You can set
	♣	the timer to water your garden early in the morning or late at
		night when water evaporates the least, or while you are away on
		holiday.
		You simply program the time (to the nearest hour), watering start-
! Control knob		ing time / duration and cycle by turning the pointer ∀ of the con-
		trol knob ! to the correct time and pressing the OK button ♣.
∀ Control knob pointer
		The Water Timer opens at the starting time you have selected.
♣ OK button
Battery status display:		The 3 LEDs Time, Start Time and
		Frequency flash to indicate that the
		battery is flat.
		v Replace the battery
		(see 4. Operation “Inserting the
		Battery”).
		5