BarkLimiter Deluxe Components

• Keep the original sales receipt, or a photocopy, in a safe

 

place.

Battery assembly

À

Gasket

Á

Battery connector

Â

Device

Ã

Security screws

Ä

Replacing the BarkLimiter Deluxe Battery Assembly

Before you replace the battery, you must remove all dirt, water, and debris from the device. You also need the security screwdriver included with the new battery assembly.

You can purchase a replacement battery assembly at http://buy.garmin.com or from your Garmin dealer. The battery assembly includes a pre-assembled back plate with a gasket, battery, and battery connector.

1Remove the four security screws from the corners of the device.

2Lift up the battery assembly.

3Disconnect the battery connector from the device.

TIP: You should grip the wires close to the connector and pull the connector outward from the circuit board.

4With the new battery assembly, connect the battery connector to the device.

When properly installed, the connector plug snaps into the port and the top face of the connector plug is flush with the edges of the port.

5Verify that the gasket is not damaged and that it is completely seated in the groove.

6Hold the battery assembly and the device firmly together, and replace all four security screws without tightening.

7Verify that the battery assembly and the device are aligned with no gaps.

8Tighten the screws evenly.

Getting More Information

You can find more information about this product on the

Garmin® website.

•Go to www.garmin.com/outdoor.

•Go to www.garmin.com/learningcenter.

•Go to http://buy.garmin.com, or contact your Garmin dealer for information about optional accessories and replacement parts.

Registering Your Device

Help us better support you by completing our online registration today.

• Go to http://my.garmin.com.

4

Device Information