Locating Satellite Signals

It may take 30–60 seconds to locate satellite signals.

1.If necessary, press page to view the locating satellites page.

2.Go outdoors to an open area.

3.Wait while the Forerunner searches for satellites.

Do not begin your activity until the locating satellites page disappears. The time of day is set automatically.

Putting on the Heart Rate Monitor

note: If you do not have a heart rate monitor, you can skip this task.

Wear the heart rate monitor directly on your skin, just below your breastplate. It should be snug enough to stay in place during your run.

1.Connect the heart rate monitor module ➊ to the strap.

➊

2.Wet both electrodes ➋ on the back of the strap to create a strong connection between your chest and the transmitter.

➋

3.Wrap the strap around your chest, and connect it.

The Garmin logo should be right- side up.

4.Bring the device within range (3 m) of the heart rate monitor.

TIP: If the heart rate data is erratic or does not appear, you may have to tighten the strap on your chest or warm up for 5–10 minutes.

Forerunner 210 Quick Start Manual

5