Garmin 6000 The Garmin Marine Network Cable:, Sample Garmin Marine Network Setups:

The Garmin Marine Network Cable:

•The Garmin Marine Network Cable (not included) has a locking ring that secures the cable to the chartplotter or marine network device. Because of the size of this locking ring, it is not connected to

the network cable at the factory to make it easier to install on your boat.

•After the cable is run to the chartplotter or network device, snap the locking ring together around the connector and insert the rubber washer as indicated on the instructions packaged with the cable.

Note: The locking ring packaged with a Garmin Marine Network Cable should not be used with any cable packaged with the GPSMAP 6000/7000 series chartplotter.

Sample Garmin Marine Network Setups:

The following illustrations show common Garmin Marine Network setups. The illustrations only show how the devices connect to each other using Garmin Marine Network cables. No power connections are shown in any of the diagrams. Ensure that you wire each device to power according to the appropriate installation instructions.

Garmin GPSMAP 6000/7000 series chartplotter

Marine Network with Two Chartplotters

GDL 30A XM® weather receiver	GSD 22 sounder
	x
	x
	x
	x
	xx

Garmin marine radar

xxxxxxxxxxxxxxxxxxxx

To transducer

Garmin GPSMAP 6000/7000 series chartplotter

Extended Marine Network with Two Chartplotters

10	GPSMAP 6000/7000 Series Installation Instructions