Garmin 6000 Notes:, do not show the power connections, do not show NMEA 2000 or NMEA 0183 connections

GSD 22 sounder unit

GMS 10 marine network port expander

x x xxx

x

xxxxxxxxxxxxxxxxxxxx

To transducer

Garmin marine radar

GDL 30A

XM weather receiver

Garmin	Garmin
GPSMAP 3000 series	GPSMAP 6000/7000
chartplotter	series chartplotter

Connecting a GPSMAP 6000/7000 Series Chartplotter to an Existing Garmin Marine Network

Notes:

•Every device connected to the Garmin Marine Network must be connected to the power supply for the boat. These diagrams show the network connections; however, they do not show the power connections. Wire each device according to the appropriate installation instructions.

•These diagrams show the Garmin Marine Network connections; however, they do not show NMEA 2000 or NMEA 0183 connections.

•When connecting a GPSMAP 6000/7000 series chartplotter to an existing Garmin Marine Network, the GMS 10 can be used but is not necessary. The GPSMAP 6000/7000 series chartplotter has three network ports and acts as a port expander. Wire the GPS antenna and additional NMEA devices to either an existing chartplotter or the new GPSMAP 6000/7000 Series chartplotter. The existing chartplotter and the new GPSMAP 6000/7000 series chartplotter share NMEA 0183 data and Garmin Marine Network data.

GPSMAP 6000/7000 Series Installation Instructions 11