5.Use a screwdriver to loosen the two screws holding the lamp in place. (You can’t remove the screws.)
6.Hold the lamp by the top, as shown, and pull the lamp straight out.
caution
Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure.
warning
This product includes a lamp component that contains mercury. Please consult your state and local regulations regarding proper disposal and do not place in a waste stream.
7.Gently insert the new lamp.
8.Once the lamp is fully inserted, tighten its screws.
9.Replace the lamp cover.
Maintaining and Transporting the Projector 55