Computer S-Video/Video

Page down

Page up

Power

Computer

S-Video/Video

Color Mode

Menu

A/V Mute

Freeze

E-Zoom

Enter

AutoESC

Using the Remote Control

Before using the remote control, pull out the tape from the battery tray as shown below.

tape

When using the remote control, stand within 20 feet of the projector. Point the remote control either at the front or back of the projector or at the screen (the projector’s front sensor can detect signals bounced off the screen). Press the button for the function you want to use. See the following pages for instructions.

Controlling the Picture and Sound

You can use the remote control to select your source, temporarily turn off the picture and sound, freeze the action, or zoom in on the picture. Make sure you have set up your projector and connected any equipment as described in Chapter 1 or Appendix A.

Switching Between Picture Sources

If you’ve connected your projector to a computer and a video source, you can use the buttons on the remote control to switch between the different sources.

Press the Computer button to select your computer source.

Press the S-Video/Videobutton to select an S-Video or standard composite video source.

After you select a source, the screen goes dark for a moment before the image appears.

32Using the Remote Control