note

Because of the different technologies used, your projected image may not exactly match the colors on your laptop or computer monitor.

The colors of the image are not right.

If you’re displaying a computer image, use the Color Mode option in the projector’s Video menu to adjust the color. If you’re displaying video, adjust the Color, Tint, and Gamma settings on the Video menu.

Try adjusting the Color Temp setting on the Advanced menu.

Check your computer display settings to correct the color balance.

There is no sound.

Try turning up the volume (see page 42).

If you’re using a VCR or other video source, make sure the volume on your VCR is not turned all the way down or muted. Also, make sure the cables are connected correctly, as described in Chapter 1.

If your presentation includes computer audio, make sure the volume control on your computer is not turned all the way down or muted. Make sure the audio cable is securely connected to both the projector and your computer’s headphone jack or

audio out jack. See page 14 (for laptops) or Appendix A (for other systems).

Make sure the Windows volume controls on your computer are not turned all the way down or set to Mute. Check this by clicking the volume control in your Windows System Tray (lower right corner of the screen).

Make sure the A/V Mute button is not enabled.

The wrong source may be selected. Press the Source button on the projector—or the Computer or S-Video/Videobutton on the remote control—to select the correct source.

68Solving Problems