Charts and 3D Chart Views

Showing a Sonar Cone on the Chart

You can show a cone that indicates the area covered by your transducer.

From the Home screen, select Charts > Fish Eye 3D > Menu > Sonar Cone > On.

Showing Suspended Targets

From the Home screen, select Charts > Fish Eye 3D > Menu > Fish Symbols > On.

Showing Tracks

From the Home screen, select Charts > Fish Eye 3D > Menu > Tracks > On.

Showing Overlay Numbers

See “Overlay Numbers” (page 48).

Fishing Chart

Use the Fishing chart for a detailed view of the bottom contours and depth soundings on the chart.

Fishing Chart

Navigation Chart

The Fishing chart uses detailed bathymetric data, and is best for offshore deep-sea fishing.

Fishing Chart Appearance

Using Waypoints

See “Waypoints” (page 26).

Using Tracks

See “Tracks” (page 30).

Showing Other Vessels

See “Configuring the Appearance of Other Vessels” (page 50).

Showing Navaids

From the Home screen, select Charts > Fishing Chart > Menu > Navaids > On.

Showing Overlay Numbers

See “Overlay Numbers” (page 48).

Showing Satellite Imagery on the Navigation Chart

You can overlay high-resolution satellite images on the land or on both land and sea portions of the Navigation chart when using a preprogrammed BlueChart g2 Vision data card.

NOTE: When enabled, high-resolution satellite images are present only at lower zoom levels. If you cannot see high-resolution images in your BlueChart g2 Vision region, you can zoom in further by pressing  . You also can set the detail level higher by changing the map zoom detail (page 8).

1.From the Home screen, select Charts > Navigation Chart > Menu > Navigation Chart Setup > Photos.

GPSMAP 700 Series Owner’s Manual

19