Garmin 906-1090-05 installation instructions Step Sixteen, Throttle setting. See figure

Figure 20

Step Sixteen:

Now test the Idle/Resume function by pressing and releasing the Idle/Res on the handheld. See figure 20. Be sure the Carburetor returns to the full Idle Position. Press the Idle/Res

button again, the throttle should advance until the actuator is fully retracted.

	Step Seventeen:
	Press the down arrow till the actuator rod is
	out about 1/4 inch. Press the Idle/Resume to
	confirm function. Re-adjust string (or parts)
	if necessary. Return throttle to Idle position
	by pressing the Idle/Res button.
		Step Eighteen:
Figure 21		Use the factory standard throttle
		(tiller or remote throttle) to
		manually advance and reduce the
		throttle setting. See figure 22.
		Note: Which ever mechanism
		is set for the highest throttle
		setting will have control of the
		carburetor (tiller, remote throttle,
		or TR-1 throttle control.) If your
		motor does not idle down fully
		when using the autopilot throttle,
		check your manual throttle to be
		sure it is set at full Idle.
Figure 22	Figure 23
Slack in throttle string at
full idle.	11