Original Part | Modified Part |
Figure 7
Step Six: Modify drive arm
Use a hack saw or similar to remove the left "ear" of the throttle drive arm. See Figure 7. (You can smooth the edges with a file or a piece of sand paper if needed.
NOTE: The throttle lever must be free to advance with out touching the lug of the Manual throttle advance. See Figure 8
Step Seven: Reinstall Throttle Drive Arm.
Reinstall the throttle drive arm. Be sure the remaining ear is to the right of the LUG & tighten hex head screw.
LUG
Figure 8
Figure 9
6
