ADF Scanning Problems (CX11NF Only)

ProblemSolution

You cannot scan using the Auto Document Feeder

•Select Office Mode or Professional Mode in EPSON Scan.

•Make sure ADF is selected as the Document Source setting in EPSON Scan.

•If the Auto Document Feeder is open, close it and then try again.

•Remove any jammed paper, then reload the document and restart EPSON Scan.

Copying Problems

Operation Problems

Problem

Solution

The CX11N does not

•

Make sure paper is loaded in the MP Tray or the paper

copy

 

cassette. See page 7 for instructions.

 

•

Make sure the original is placed face-down on the document

 

 

table or face-up in the Auto Document Feeder. See page 14.

 

 

 

Copy Quality Problems

Problem

Solution

Print quality is not

You may not be using the correct type of paper for copying. The

good

available paper types for copying are not the same as that for

 

printing. Depending on the paper source, the following paper types

 

are available for copying.

•MP tray: Plain paper, Letterhead, Recycled paper, Colored paper, Transparencies, Labels

•Optional paper cassette: Plain paper, Letterhead, Recycled paper, Colored paper

Coated paper, thick paper, and papers such as postcards or envelopes are not available for copying.

Copying Problems 109