Bar and chain combinations | Garmin 353, EVA-2082S/1220 guide

TECHNICAL DATA

Bar and chain combinations

The following cutting attachments are approved for the models Husqvarna 346XP, 346XPG, 346XP E-tech, 346XPG E- tech, 353, 353G, 353 E-tech and 353G E-tech, Triobrake.

			Bar		Chain

	Length, inch	Pitch, inch	Gauge, mm	Max. nose radius	Type	Length, drive
	Length, inch	Pitch, inch	Gauge, mm	Max. nose radius	Type	links (no.)
						links (no.)

	13	0,325				56

	15	0,325				64

	16	0,325	1,3		Husqvarna H30	66

	18	0,325				72

	20	0,325		10T		80

	13	0,325				56

	15	0,325				64

	16	0,325	1,5		Husqvarna H25	66

	18	0,325				72

	20	0,325		12T		80

Saw chain ﬁling and ﬁle gauges

English – 39

Image 39

Garmin 353, EVA-2082S/1220 manual Bar and chain combinations, Saw chain ﬁling and ﬁle gauges

Contents

Operator′s manual KEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents Dear Customer Introduction What is what on the chain saw? What is WHAT? Before using a new chain saw General Safety Precautions Chain brake and front hand guard Machine′s safety equipmentAlways use common sense Personal protective equipment General Safety Precautions Throttle lockout Chain catcherRight hand guard Mufﬂer Stop switchCutting equipment Vibration damping system Injuries Some terms that describe the bar and chain Cutting equipment designed to reduce kickbackBar Chain General information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge setting Tensioning the chain Checking chain lubrication Lubricating cutting equipmentWhich could lead to serious, even fatal injuries Chain oil Filling with chain oil Checking wear on cutting equipment Needle bearing lubrication Working with the chain AssemblyFitting the bar and chain Fitting a spike bumper Fuel Fuel Handling Long-term storage Fuel safetyFuelling Transport and storage Warm engine Starting and StoppingStarting and stopping Cold engine Stopping General working instructions Basic safety rulesWorking Techniques Before use Jam. Always stop the engine before cleaning Basic cutting technique TermsLimbing Safe distance Tree felling technique Clearing the trunk and preparing your retreat Felling direction Felling cut Directional cuts Cutting trees and branches that are in tension General adviceFreeing a tree that has fallen badly Freeing a trapped tree How to avoid kickback What is kickback?Cutting the trunk into logs Maintenance Carburettor adjustmentGeneral High speed jet H Correctly adjusted carburettor Checking the right-hand brake trigger Checking the brake triggerImmediately Mufﬂer Tensioning the recoil spring Replacement of broken recoil and drive disc springsStarter Changing a broken or worn starter cord Needle bearing lubrication Air ﬁlterSpark plug Lubricating the bar tip sprocket Cooling system Adjustment of the oil pumpAir Injection centrifugal cleaning Running when making adjustments Temperature 0C or colder Electrical carburettor heatingWinter use Daily maintenance Weekly maintenance Monthly maintenance Maintenance schedule Technical data Technical Data Saw chain ﬁling and ﬁle gauges Bar and chain combinations EC-declaration of conformity Applies to Europe onlyEN ISO 12100-22003, Cispr 122005, EN ISO Page Page Page Original instructions 1153178-26