Garmin GDL 69 manual Verify19BXM Subscribed Services

Figure 4-2. Data Link Status Page

5.Refer to TableX4-1Xto read the SAT ID/CONNECTIVITY information.

6.Verify radio IDs and signal quality is between 2 – 3. If signal quality is zero, check the antenna and wiring.

Table 4-1. Data Link Status

SAT ID Field

‘- -‘

‘XM’

‘X0’, ‘X1’, ‘X2’, or ‘X3’

‘-0’, ‘-1’, ‘-2’, or ‘-3’

“Searching...”

“Satellite in view”

GDL 69/69A – 430/530 Series interface communications not yet established.

GDL 69/69A not yet communicating with internal satellite radio hardware (normal during power-up).

‘X’ = Satellite radio service activated. Satellite signal quality is indicated by the numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.

‘-’ = Satellite radio service is not activated. Satellite signal quality is indicated by the numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.

Connectivity Field

No satellite is currently in view, signal quality is ‘0’.

Indicates a signal quality between 1 and 3.

4.3 Verify19BXM Subscribed Services

The 430/530 supports the following weather services: NEXRAD, graphical METAR, text-based METAR, Wind, and Graphical Temperature/Dew Point. These services are available only in the United States. Verify included services by displaying them on the unit, if applicable. If signal quality is between 1 and 3, but no data is displayed, contact XM Satellite Radio to verify subscription. Be sure that the unit is updated with the most current software.

Page 14	XM Activation Procedures
190-00355-04	Rev. H