GFL™ 10 Installation and Configuration Instructions

Use the Garmin® GFL 10 adapter to adapt analog information provided by a fluid-level sensor on your boat to your NMEA 2000® network. The GFL 10 adapter allows you to observe fluid-level information on compatible Garmin display devices connected to your NMEA 2000 network. For a list of compatible Garmin chartplotters and devices, visit www.garmin.com.

Compare the contents of this package with the packing list on the box. If any pieces are missing, contact your Garmin dealer immediately.

Product Registration

Help us better support you by completing our online registration today. Go to http://my.garmin

.com. Keep the original sales receipt, or a photocopy, in a safe place.

Contact Garmin

Contact Garmin Product Support if you have any questions while using your GFL 10 adapter. In the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020.

In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.

In Europe, go to www.garmin.com/support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.

See the Important Safety and Product Information guide in the compatible Garmin display device box for product warnings and other important information.

caution: Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.

notice: When drilling or cutting, always check the opposite side of the drilling or cutting surface.

Needed Tools and Supplies

•Heat-shrink tubing and a heat gun

•Cable ties

•Additional NMEA 2000 cabling and connectors (optional)

July 2009

190-01081-06 Rev. A

Printed in Taiwan