➊

➋ ➋

➌

➍

➎

Connecting the GFL 10 Adapter to an

Existing NMEA 2000 Network

Configuring the GFL 10 Adapter

➊GFL 10 adapter

➋NMEA 2000 device (not included)

➌Drop cable (optional - not included)

➍T-connector (one included)

➎Existing NMEA 2000 network

NOTICE: This section provides specific configuration information for the GFL 10 adapter using your compatible Garmin display device. To access the NMEA 2000 configuration menu on your display device, consult the documentation provided with your display device.

Configuring the NMEA 2000 Fluid Type

You can indicate the type of fluid that is in the tank with which each GFL 10 adapter is associated.

1.From the NMEA 2000 Devices list, select the GFL 10 device.

2.Select an option:

•For most Garmin chartplotters, select Review > N2K Fluid Type.

•For other Garmin marine devices, select Config > N2K Fluid Type.

3.Select a fluid type.

4.Select OK.

Configuring the Tank Number

If your boat has multiple fluid tanks, you can indicate which tank each GFL 10 adapter is associated with.

1.From the NMEA 2000 Devices list, select the GFL 10 device.

2.Select an option:

•For most Garmin chartplotters, select Review > Tank Number.

•For other Garmin marine devices, select Config > Tank Number.

3.Select a tank number.

4.Select OK.



GFL 10 Installation and Configuration Instructions