Garmin GFL 10 Restoring Factory Default Settings, Yes, Review, Config, Factory Defaults, Factory Defaults

1 10

When you restore factory default settings, you will lose all custom configuration settings except fluid-level calibration.

1.From the NMEA 2000 Devices list, select the GFL 10 device.

2.Select an option:

•For most Garmin chartplotters, select Review > Factory Defaults.

•For other Garmin marine devices, select Config > Factory Defaults.

3.Select Yes.

GFL 10 Installation and Configuration Instructions

Contents

Product Registration Contact Garmin Needed Tools and Supplies Determining an Installation Location Wiring the GFL 10 Adapter Wiring the GFL 10 Adapter to an Analog Gauge Wiring the GFL 10 Adapter Directly to a Fluid-LevelSensor Connecting the GFL 10 Adapter to a NMEA 2000 Network Configuring the NMEA 2000 Fluid Type Configuring the Tank Number Configuring the NMEA 2000 Tank Capacity Calibrating the Fluid Level Troubleshooting the Tank Number Troubleshooting the Gauge Type NOTE: Resetting the Fluid Level Calibration To configure the tank number if the menu option is not displayed: Generic Config Generic Configuration “INSTANCE=” INSTANCE=2Done Restoring Factory Default Settings Specifications Physical Weight: Size: Total Cable Length: 16 ft. (4.9 m) Garmin products, visit the Garmin Web site at www.garmin.com