Zigzag

The Zigzag pattern steers the boat from port to starboard and back, over a specified time and

angle, across your current heading. The default values are 1.5 minutes and 30°.

Circles

The circle pattern steers the boat in a constant circle, in a specified direction and at a

specified time interval. The default value create a circle that takes 5 minutes to complete.

The autopilot positions the boat so that the circle pattern is centered on the point at which you engage the pattern.

U-Turn

The U-turn pattern turns the boat around 180° and maintains the new heading.

Man Overboard

The Man Overboard pattern turns the boat around with the intent of running alongside the

point where the Man Overboard pattern was initiated. The boat must be below planing speed when using this pattern.

Caution: The Man Overboard pattern is not determined by GPS and is affected by wind, current, and speed. Be ready to adjust the throttle and take the helm to avoid harm to a person in the water.



GHC 10 Quick Start Manual