Configuring a GHC 10 Remote

Control

To configure an optional remote control on the GHC 10, from the Heading screen, select Menu > Setup > Remote.

You can connect one optional GHC 10 remote control to a GHC 10.

Search for Remote—allow the GHC 10 to search for an optional GHC 10 remote control.

Disconnect Remote—(only available when a remote control is connected) disconnect a connected remote control.

Button (1–3) Action—define the functions of the three dynamic buttons on a connected remote control. Choose from the options listed in the Remote Button Action Table.

Button Function

Page Reference

Zigzag

Page 8

Circles

Page 8

U-Turn

Page 8

Route To

Page 10

Orbit

Page 10

Cloverleaf

Page 10

Search

Page 10

Transmission

Page 4

Direction

 

Remote Button Action Table

Notes:

•If you assign Transmission Direction to a button on the remote control, the autopilot must be in standby mode to change the direction (forward or reverse).

•If you assign a pattern to a button on the remote control, remember that you are responsible for the safe operation of your boat. Do not begin a pattern until you are certain that the water is clear of obstacles.

GHC 10 Quick Start Manual

13