Introduction

The GHP™ 10/10V autopilot system continuously adjusts the steering of your boat to maintain a constant heading.

In addition to the basic heading-hold functionality, the GHP 10/10V autopilot system allows manual steering and several modes of automatic-steering functions and patterns.

Operate the GHP 10/10V autopilot system using the GHC™ 10 control unit. Through the GHC 10 control unit, you engage and steer, set up, and customize the GHP 10/10V autopilot system.

To install the GHP 10/10V autopilot system, including the GHC 10 control unit, use the provided installation instructions.

The GHP 10/10V and the GHC 10 are NMEA 2000® certified.

Warnings

•You are responsible for the safe and prudent operation of your vessel. The GHP 10/10V is a tool that will enhance your capability to operate your boat. It does not relieve you from the responsibility of safely operating your boat. Avoid navigational hazards and never leave the helm unattended.

•Always be prepared to promptly regain manual control of your boat.

•Learn to operate the GHP 10/10V on calm and hazard-free open water.

•Use caution when operating the GHP 10/10V at high speeds near hazards in the water, such as docks, pilings, and other boats.

GHC 10 Quick Start Manual

1