GarrettCom Locating Magnum P80F & P80C 10/00Mb Personal Switch, Table-Top or Shelf Mounting

Proper attachment of mounting bracket for wall mounting

Magnum P80F & P80C Personal Switches Installation and User Guide (07/03)

3.0INSTALLATION

This chapter provides instructions for installing Magnum P80-series units.

3.1Locating Magnum P80F & P80C 10/00Mb Personal Switch

The location of a Magnum P80F & P80C Personal Switch is dependent on the physical layout of the network. Typically the switch is located in a workplace site. The compact size of the unit allows it to be conveniently placed in an office, classroom or lab area, and it can also be either shelf- of wall-mounted (see mounting instructions in 3.1.2 below). Metal wall- mounting clips are included with the unit.

Locate an AC receptacle that is within six feet (2 meters) of the intended Magnum P80F & P80C site. The rugged metal case of the Magnum P80F & P80C will normally protect it from accidental damage in a lab or workplace setting. Maintain an open view of the top surface to visually monitor the status LEDs.

3.1.1Table-Top or Shelf Mounting

The Magnum P80F & P80C Personal switch can be easily mounted on a table-top or any suitable horizontal surface, and has four rubber feet to provide stability without scratching finished surfaces.

3.1.2 Wall (or vertical surface) mounting

Each Magnum P80-series Personal Switch is shipped with two metal mounting brackets (and screws) to allow the

unit to be mounted in nearly any desired

orientation or position. The brackets are attached to the metal Switch case using one of the

5VDC,
	Magnum P80
	Personal Switch
Power	Speed
	Link/Act
Error
	F/H
GARRETT
	PORTS 1SW	2SW	3	4	5	6	7

Top view- Magnum P80F with brackets attached for wall

www . GarrettCom . com

14